NETSH, Version 6.1.7600.16385
Usage: NETSH [-a AliasFile] [-c Context] [-r RemoteMachine] [-u [DomainName\]UserName] [-p Password | *]
[Command | -f ScriptFile]
The following commands are available:
Commands in this context:
? - Displays a list of commands.
add - Adds a configuration entry to a list of entries.
advfirewall - Changes to the 'netsh advfirewall' context.
branchcache - Changes to the 'netsh branchcache' context.
bridge - Changes to the 'netsh bridge' context.
delete - Deletes a configuration entry from a list of entries.
dhcpclient - Changes to the 'netsh dhcpclient' context.
dnsclient - Changes to the 'netsh dnsclient' context.
dump - Displays a configuration script.
exec - Runs a script file.
firewall - Changes to the 'netsh firewall' context.
help - Displays a list of commands.
http - Changes to the 'netsh http' context.
interface - Changes to the 'netsh interface' context.
ipsec - Changes to the 'netsh ipsec' context.
lan - Changes to the 'netsh lan' context.
mbn - Changes to the 'netsh mbn' context.
namespace - Changes to the 'netsh namespace' context.
nap - Changes to the 'netsh nap' context.
netio - Changes to the 'netsh netio' context.
p2p - Changes to the 'netsh p2p' context.
ras - Changes to the 'netsh ras' context.
rpc - Changes to the 'netsh rpc' context.
set - Updates configuration settings.
show - Displays information.
trace - Changes to the 'netsh trace' context.
wcn - Changes to the 'netsh wcn' context.
wfp - Changes to the 'netsh wfp' context.
winhttp - Changes to the 'netsh winhttp' context.
winsock - Changes to the 'netsh winsock' context.
wlan - Changes to the 'netsh wlan' context.
The following sub-contexts are available:
advfirewall branchcache bridge dhcpclient dnsclient firewall http interface ipsec lan mbn namespace nap netio p2p ras rpc trace wcn wfp winhttp winsock wlan
To view help for a command, type the command, followed by a space, and then
type ?.
The following commands are available in the NETSH ADVFIREWALL context:
? - Displays a list of commands.
consec - Changes to the 'netsh advfirewall consec' context.
dump - Displays a configuration script.
export - Exports the current policy to a file.
firewall - Changes to the 'netsh advfirewall firewall' context.
help - Displays a list of commands.
import - Imports a policy file into the current policy store.
mainmode - Changes to the 'netsh advfirewall mainmode' context.
monitor - Changes to the 'netsh advfirewall monitor' context.
reset - Resets the policy to the default out-of-box policy.
set - Sets the per-profile or global settings.
show - Displays profile or global properties.
The following sub-contexts are available:
The following commands are available in the NETSH BRANCHCACHE context:
? - Displays a list of commands.
dump - Displays a configuration script.
exportkey - Exports the content information key.
flush - Flushes the contents of the local cache.
help - Displays a list of commands.
importkey - Imports a new content information key.
reset - Resets the BranchCache service.
set - Sets configuration parameters.
show - Displays configuration parameters.
smb - Changes to the 'netsh branchcache smb' context.
The following sub-contexts are available:
The following commands are available in the NETSH BRIDGE context:
? - Displays a list of commands.
dump - Displays a configuration script.
help - Displays a list of commands.
install - Installs the component corresponding to the current context.
set - Sets configuration information.
show - Displays information.
uninstall - Removes the component corresponding to the current context.
The following commands are available in the NETSH DHCPCLIENT context:
The following commands are available in the NETSH DNSCLIENT context:
? - Displays a list of commands.
add - Adds a configuration entry to a table.
delete - Deletes a configuration entry from a table.
dump - Displays a configuration script.
help - Displays a list of commands.
set - Sets configuration information.
show - Displays information.
The following commands are available in the NETSH FIREWALL context:
? - Displays a list of commands.
add - Adds firewall configuration.
delete - Deletes firewall configuration.
dump - Displays a configuration script.
help - Displays a list of commands.
set - Sets firewall configuration.
show - Shows firewall configuration.
The following commands are available in the NETSH HTTP context:
? - Displays a list of commands.
add - Adds a configuration entry to a table.
delete - Deletes a configuration entry from a table.
dump - Displays a configuration script.
flush - Flushes internal data.
help - Displays a list of commands.
show - Displays information.
The following commands are available in the NETSH INTERFACE context:
? - Displays a list of commands.
dump - Displays a configuration script.
help - Displays a list of commands.
httpstunnel - Changes to the 'netsh interface httpstunnel' context.
isatap - Changes to the 'netsh interface isatap' context.
portproxy - Changes to the 'netsh interface portproxy' context.
set - Sets configuration information.
show - Displays information.
tcp - Changes to the 'netsh interface tcp' context.
teredo - Changes to the 'netsh interface teredo' context.
The following sub-contexts are available:
The following commands are available in the NETSH IPSEC context:
? - Displays a list of commands.
dump - Displays a configuration script.
dynamic - Changes to the 'netsh ipsec dynamic' context.
help - Displays a list of commands.
static - Changes to the 'netsh ipsec static' context.
The following sub-contexts are available:
The following commands are available in the NETSH LAN context:
? - Displays a list of commands.
add - Adds a configuration entry to a table.
delete - Deletes a configuration entry from a table.
dump - Displays a configuration script.
export - Saves LAN profiles to XML files.
help - Displays a list of commands.
reconnect - Reconnects on an interface.
set - Configures settings on interfaces.
show - Displays information.
The following commands are available in the NETSH MBN context:
? - Displays a list of commands.
add - Adds a configuration entry to a table.
connect - Connects to a Mobile Broadband network.
delete - Deletes a configuration entry from a table.
disconnect - Disconnects from a Mobile Broadband network.
dump - Displays a configuration script.
help - Displays a list of commands.
set - Sets configuration information.
show - Displays information.
The following commands are available in the NETSH NAMESPACE context:
? - Displays a list of commands.
dump - Displays a configuration script.
help - Displays a list of commands.
show - Displays information.
The following commands are available in the NETSH NAP context:
? - Displays a list of commands.
client - Changes to the 'netsh nap client' context.
dump - Displays a configuration script.
help - Displays a list of commands.
hra - Changes to the 'netsh nap hra' context.
reset - Resets configuration.
show - Shows configuration and state information.
The following sub-contexts are available:
The following commands are available in the NETSH NETIO context:
? - Displays a list of commands.
add - Adds a configuration entry to a table.
delete - Deletes a configuration entry from a table.
dump - Displays a configuration script.
help - Displays a list of commands.
show - Displays information.
The following commands are available in the NETSH P2P context:
? - Displays a list of commands.
collab - Changes to the 'netsh p2p collab' context.
dump - Displays a configuration script.
group - Changes to the 'netsh p2p group' context.
help - Displays a list of commands.
idmgr - Changes to the 'netsh p2p idmgr' context.
pnrp - Changes to the 'netsh p2p pnrp' context.
The following sub-contexts are available:
The following commands are available in the NETSH RAS context:
? - Displays a list of commands.
aaaa - Changes to the 'netsh ras aaaa' context.
add - Adds items to a table.
delete - Removes items from a table.
diagnostics - Changes to the 'netsh ras diagnostics' context.
dump - Displays a configuration script.
help - Displays a list of commands.
ip - Changes to the 'netsh ras ip' context.
set - Sets configuration information.
show - Displays information.
The following sub-contexts are available:
The following commands are available in the NETSH RPC context:
? - Displays a list of commands.
add - Creates an Add list of subnets.
delete - Creates a Delete list of subnets.
dump - Displays a configuration script.
filter - Changes to the 'netsh rpc filter' context.
help - Displays a list of commands.
reset - Resets the selective binding settings to 'none' (listen on all interfaces).
show - Displays the selective binding state for each subnet on the system.
The following sub-contexts are available:
The following commands are available in the NETSH TRACE context:
? - Displays a list of commands.
convert - Converts a trace file to an HTML report.
correlate - Normalizes or filters a trace file to a new output file.
diagnose - Start a diagnose session.
dump - Displays a configuration script.
help - Displays a list of commands.
show - List interfaces, providers and tracing state.
start - Starts tracing.
stop - Stops tracing.
The following commands are available in the NETSH WCN context:
? - Displays a list of commands.
dump - Displays a configuration script.
enroll - Connects to a wireless network.
help - Displays a list of commands.
query - Queries information about a WCN device.
The following commands are available in the NETSH WFP context:
? - Displays a list of commands.
capture - Captures real-time diagnostic information.
dump - Displays a configuration script.
help - Displays a list of commands.
set - Sets WFP diagnostic options.
show - Shows WFP configuration and state.
The following commands are available in the NETSH WINHTTP context:
? - Displays a list of commands.
dump - Displays a configuration script.
help - Displays a list of commands.
import - Imports WinHTTP proxy settings.
reset - Resets WinHTTP settings.
set - Configures WinHTTP settings.
show - Displays currents settings.
The following commands are available in the NETSH WINSOCK context:
? - Displays a list of commands.
audit - Displays a list of Winsock LSPs that have been installed and removed.
dump - Displays a configuration script.
help - Displays a list of commands.
remove - Removes a Winsock LSP from the system.
reset - Resets the Winsock Catalog to a clean state.
set - Sets Winsock options.
show - Displays information.
The following commands are available in the NETSH WLAN context:
? - Displays a list of commands.
add - Adds a configuration entry to a table.
connect - Connects to a wireless network.
delete - Deletes a configuration entry from a table.
disconnect - Disconnects from a wireless network.
dump - Displays a configuration script.
export - Saves WLAN profiles to XML files.
help - Displays a list of commands.
refresh - Refresh hosted network settings.
reportissues - Generate WLAN smart trace report.
set - Sets configuration information.
show - Displays information.
start - Start hosted network.
stop - Stop hosted network.
| Notes | 1: | The above help listing was created using NETSHHelp.bat. |
| 2: | See silent installations, network section for a usage example. | |
| 4: | This page shows the syntax for NETSH, Version 6.1.7600.16385 (Windows 7), see NETSH, Version 10.0.18362.1 for a more recent version (Windows 10). |
page last modified: 2020-08-25; loaded in 0.0019 seconds